SS 304 Chain Rod Conveyor Belt with Chains - Chain rod belting, SS chain rod conveyor belt, for cooling, stamping, food equipment

General Introduction: Chain Rod Conveyor Belt is also simplified as Rod Belting with metal rods attached to chains generating motion to transport along the conveyor. Chain size (Center to Center) 470mm Width, 610mm Width, 670mm Width as popular sizes. Sprockets and other parts available.

Structures:

Chain rod conveyor belt consists a metal chain with interconnected links, driven by a motor along a predefined path within the conveyor system. Metal rods are attached to the chain at regular interval space, running parallel, and providing a stable surface for materials. The space is adjustable spacing for conveying varying product sizes.

Materials: SS, steel, galvanized.

We offer:
5 Gauge chain rod belt;
Stainless steel 304 chain rod conveyor belt;
Stainless steel 316 chain rod conveyor belt;
Carbon steel rod belting

Chain Rod Belting
Belt width: 36 inch
Wire gauge: 5 gauge
Turn belting:  90 angle turn

Stainless Steel Chain Rod Wire Conveyor Belt

Size:1 meter wide x 7101 meter long
Stainless Steel 304 wire rod conveyor belt
SS Chain Rod Conveyor Belt, optional size: Width 1440mm x Length 7000mm
Material: SS304 and SS 316
Supplied to UAE

Mesh drawing detail:
Wire distance (long): 8mm
Wire distance (short): 5mm

S.S.304 Conveyor Belt for Cooling
Material : S.S.304
Wire Diameter : 0.6 mm x 0.7 mm
Width : 940 mm
Length : 10 meters


Stainless Steel Rod Chain Belt, Belt Length 110 m, Belt Width: 600 mm
Fittings: Stainless steel SPLIT METAL SPROCKET WITH 40 MM Square bore 176 mm
Purpose: To be used for 2 Cooling conveyors (Length 27 m each) for Rubber profile.
Type of the cooling: dip
Maximum load – 5 kg/ m
Maximum speed – 15 m/ min

Conveyor Belt for FOOD EQUIPMENT, Riveted End

Supplied to India
Material: S.S.304 Conveyor Belt
Wire gauge- 20gx20g
Chain- ½” Pitch(S.S304)
Chain Cross Rod- 5mm(S.S.304) Stepped down to 4mm at every 2” Distances.
Ends riveted.

SS Wire Mesh Conveyor Belt with Chain - For Stamping

Material: SS304 and SS316 
Chain link belt:
Wire mesh conveyor belt to handle 300 degree sheet metal parts in a hot stamp operation.
The belting needs to be 3000mm wide with a total length of 18,500mm long.
Max Load: 25kg/m
Drive style: Sprockets drive the belt.